What a virtual card is
A virtual card is a card number with no plastic and no bank account behind it: you load money onto it first and can then spend only that much. Its job is to make an international payment possible without involving your bank account, and the thing least often mentioned about it is that at checkout the merchant can see that the card is a prepaid one and which country issued it.
- Lesson 8 of 8
- Beginner
- 12 min read
- Free, no signup
Five steps, in the order they actually happen
- 1
Pick an issuer
The first criterion is what you can load it with, not what it costs.
- 2
Verification
Learn what documents they want before you pay, not halfway through.
- 3
Load it
The amount of that one purchase, plus a little for conversion. No more.
- 4
Pay
The billing address must match the one the issuer holds on your account.
- 5
Watch the balance
The leftover is usually not withdrawable and a dormancy fee eats it over time.
This order is for a one off purchase. A monthly subscription has a sixth step, covered in the text: keeping the balance topped up until next month's renewal.
What exactly is a virtual card, and how does it differ from a bank card?
There are two words in the name and each says something different. Virtual means there is no plastic: what you get is a sixteen digit number with an expiry date and a CVV, which works for an online payment exactly as well as a physical card would. Prepaid is the more important word and it is the one that determines how the card behaves.
The US Consumer Financial Protection Bureau puts the definition in one sentence: a prepaid card "is not linked to a bank or credit union account", and "instead, you put money into the card account, sometimes called loading money onto the card, before you can spend it". That is where it parts company with a debit card: with a debit card you are spending money you have in your bank account, and with a prepaid card you are withdrawing money you already put into the card account itself. The difference from a credit card is starker still: there you are borrowing money and must repay it on the due date.
Hold on to the practical consequence of that definition, because the rest of this lesson stands on it: there is no bank behind this card that you have a relationship with. There is an intermediary holding your money and letting you spend it. That is both the card's greatest advantage and the source of everything that can go wrong with it.

Five steps, from picking an issuer to a first payment
Step one, pick an issuer. The right criterion is not price, it is what you can load it with and whether it is reachable for you at all. One of the routes maintained on our buying AI accounts from Iran page is Bitrefill, which sells virtual prepaid cards for crypto: a Digital Prepaid Visa from $20 to $1000 and a Virtual Prepaid Mastercard from $20 to $500, both rechecked in its catalogue today.
Step two, verification. How much identity documentation they ask for is itself a selection criterion, and it is better learned before you pay than halfway through. If a route asks for a document you do not have, change route there and then; sending an incomplete or incorrect document is neither a solution nor something we would suggest.
Step three, load it. The money lands in the card account and from that moment it is in the intermediary's hands. One habit that pays off later: load the amount of the purchase you actually have in mind, plus a little for currency conversion, and no more. Step five says why.
Step four, pay. You enter the card number, the expiry and the CVV on the merchant's checkout page. If it asks for a billing address, give the one the card issuer has on your account; a mismatch between those two is one of the most common reasons a payment is declined.
Step five, watch the balance. This is where most people lose money. Whatever is left on the card after a purchase is usually not withdrawable and simply stays there, and if the card carries a maintenance fee that leftover drains away over time. A card left empty and forgotten for three months usually no longer holds the number you left on it.
Four things that must be true before you load, and four that are beside the point
Before you load
- A test payment at the smallest possible amount has gone through and been accepted.
- You have opened the issuer's fee schedule and found its six events.
- You know whether the card currency matches the currency the merchant bills in.
- If this is a subscription, you know who tops the balance up next month.
These do not decide it
- A low issuance fee, which happens once and is the smallest number on the list.
- The Visa or Mastercard brand on it, which says nothing about the issuer.
- A high loading limit, which only tells you how much you could risk.
- Instant issuance, which is the speed of delivering a number and not of it being accepted.
The right hand column is not a list of unimportant things; they are the things the advertising highlights, and not one of them decides whether your payment goes through.
What can the merchant see about your card at checkout?
This is the part almost no guide writes down, and it is exactly the part that explains why a payment gets declined.
The official Stripe documentation, for one of the most widely used payment processors in the world, lists the fields of the card object. Two of them matter here. The funding field, described as: "Card funding type. Can be credit, debit, prepaid, or unknown." And the country field: "Two-letter ISO code representing the country of the card."
So the merchant does not have to guess. At the moment you type the card number in, their processor tells them that this is a prepaid card and which country its issuing bank sits in. If that merchant has a policy of not accepting prepaid cards, the payment is declined, and the error message usually says nothing useful.
And now the position that matters: this is not something to get around, it is something to know beforehand. This lesson teaches no way of hiding a card's type or its issuing country, and no other lesson in this section will either. The value of the fact lies elsewhere: once you know the merchant can see it, you stop loading a card before you have tested the service, and you stop reading a declined payment as a technical glitch and retrying it ten times. The right order is a test payment at the smallest possible amount first, then loading the real amount.
Where the fees actually take your money
The right way to read an issuer's fee schedule is not as a price list but as a list of events. Every fee fires when one specific thing happens, and the fees that hurt most are the ones whose event happens months after the purchase.
Six events worth finding before you choose a card: issuance, which is the only number usually quoted in the advertising; loading, which is sometimes a percentage; spending, which is usually free; currency conversion, which fires when the card is in dollars and the merchant bills in euros and is often the heaviest event on the list; sitting idle, the monthly fee taken from a dormant card; and closing or emptying it, which on many cards does not exist at all because the balance cannot be withdrawn.
Our position is simple: comparing cards on the issuance fee is almost always the wrong comparison. The issuance fee is one off and small and it is the one everybody quotes; the conversion fee repeats on every payment and the dormancy fee lands on something you have forgotten about. Two cards with identical issuance fees can cost two completely different amounts over six months.
And one number deliberately absent from this lesson: any fee figure at all. These differ between issuers and change on their own, and a stale number is worse than none. Open the issuer's own fee schedule before you load the card and find those six events in it.
The fee the advertising quotes, and the fees that arrive later
- 1
The issuance fee
The only number usually quoted in the advertising. It happens once and is the smallest number on the list.
- 2
The loading fee
Sometimes a percentage, so it bites on small amounts while appearing in the table as a small number.
- 3
The conversion fee
Fires whenever the card currency is not the currency the merchant bills in, and it repeats on every payment rather than once.
- 4
The dormancy fee
Lands on a card you have forgotten about, and since nothing notifies you it stays invisible until you go back to the card.
- 5
The balance that never comes back
On many cards the balance cannot be withdrawn, so anything left unspent is in effect a fee, even though no table calls it one.
None of the layers below the waterline are visible at the moment of purchase, and that is the hard part: a card that looks cheap is no evidence that it ends up cheap.
Until you spend it, whose money is it?
This has to be said plainly, because it is the only real risk of the instrument. When you load the card, the money has left you and settled with an intermediary that is not a bank and with which you have no relationship beyond a card number. Until the moment you spend it, your money is exactly as safe as that intermediary is still standing. If the service shuts down, closes your account, or simply stops answering support, what you hold is a card number and not a claim you can pursue.
The protections that do exist for prepaid cards are written by the country that regulates the issuer. If you are not in that country, assume you cannot invoke them until proven otherwise. That is neither cynicism nor legal advice; it just means the backstop that exists for a cardholder in the issuing country may not exist for you.
So the practical rule: do not use a virtual card as a place to keep money. It is an instrument for passing through, not an account. Load one purchase, spend it, and leave the card empty. The larger the balance you leave sitting on it, the more you have bet on the survival of a company you know nothing about.
One last trap, specific to subscriptions: next month's automatic renewal fails if the balance is not enough, and the service cuts off mid use. If what you are buying is a subscription, either keep the balance topped up by hand or pick a different route from the start, one that was built for recurring payment.
The fast path, with AI
The usual way to choose a card is to open three comparison sites and end up with rankings all built on the issuance fee, which is the least important number on the list. The faster way is a small change to the question: instead of comparing prices, turn the issuer's own fee schedule into a list of events. A language model is good at this because the job is reading a long table and labelling its rows, not knowing which card is better.
Click any step to check it off as you go.
Copy-ready recipe
The text below is the fees or terms page of a prepaid card issuer.
[TEXT]
{full text of the fees page}
Build a table with six rows, one per event:
1. Issuing the card
2. Loading it
3. Spending
4. Currency conversion
5. The card sitting idle
6. Closing the card or withdrawing the balance
For each row write two columns. First, the sentence from the text that describes that event, verbatim and not rewritten. Second, whether that fee happens once or repeats.
If an event does not appear in the text, write "not in the text" in the first column and bring in no number from anywhere else. Do not compute any total, and write no opinion about whether this issuer is good.Before you trust the output: A fast, cheap model of the Gemini Flash class is enough for this; our current pick is written up in the <a class="text-link" href="/ai/">AI section</a>. Three boundaries: a fee schedule says what the issuer has declared and not whether the destination merchant will accept the card, which their payment processor decides; the quoted sentence is the authority and not the summary, because the summary is exactly where a hard condition comes out sounding soft; and a card number, a CVV or a one time code never goes into any chat, not even "to check that it is right".
AI in this kind of work
On this topic AI does one specific thing well: reading a long, dull fee schedule you pasted yourself and pulling its events out. What it should not be asked is which issuer works with which service; that pairing is the single thing that changes most often, and it is decided on the merchant's payment processor side rather than the issuer's.
Tools that actually help
- RGB Guide
For pasting a whole fees page and getting the event table back with an exact quotation per row. It holds long text well, which is the whole job of this recipe.
- RGB Guide
The same job at a lower cost. When the text is already in front of the model and only needs sorting, the fast cheap tier is enough.
- RGB Guide
For comparing three issuers at once: you load each fee schedule as a source and the answer comes only from those sources rather than the model's memory.
Where it backfires
The main risk here is what you type in yourself. A card number and a CVV together are precisely what is sufficient to spend the money, and there is no reason for either to enter a chat. Google writes in the Gemini Apps privacy notice that "a subset of chats are reviewed by human reviewers" and says plainly "please don't enter confidential information that you wouldn't want a reviewer to see", with human reviewed chats retained for up to three years. The second risk is softer and happens more often: a model states with confidence that a given card works with a given service, and that sentence can be wrong today even if it was right six months ago. The text of a fee schedule or a terms page is public and pasting it is entirely fine.
Sources: Gemini Apps Privacy Notice, Google
Where this advice stops
This lesson tells you how a virtual card works and where it takes your money; it cannot tell you whether a particular card will be accepted by a particular merchant. That decision is made at that moment by that merchant's payment processor and no page can guarantee it in advance; the only way to know is a test payment at the smallest possible amount. No fee figures appear here either, because they differ between issuers and the issuers change them. The card amount ranges quoted in the text were read from that service's own catalogue on 7 September 2026, and the buying AI accounts from Iran page is where they are kept current. RGB takes no money from any of these issuers and there are no affiliate links here.
From our own work
We are on the merchant side of this same story, and one of our technical decisions came out of it. The plans on this site are priced in dollars, and the Toman figure you see is that dollar amount times the live Tether rate rather than any official rate, because the live rate is what a foreign purchase actually costs an Iranian customer. To fetch it, the theme's pricing engine tries three sources in order, Nobitex then Wallex then Tabdeal, and tests every answer against a sanity band of 20,000 to 3,000,000 Toman, discarding anything outside it. The reason was paid for once: an API that returns a broken number instead of an error will silently misprice every single page on the site.
Real follow-up questions
Need a specific answer? Ask our team directly:
Is a virtual card safer than a physical one?
Yes in one respect and no in another. Because it is prepaid, the most you can lose in the worst case is the balance on the card rather than your bank account, and that is a genuine advantage. But the card number itself carries no extra protection and is just as usable if it leaks; its safety comes from the balance being small, not from the card being virtual.
Can I get the leftover balance back?
On many prepaid cards no, and that is what turns it into a hidden fee in practice. Open the issuer's fee schedule before you load the card and look for a "closing the card or withdrawing the balance" event; if no such row exists at all, its absence is the answer. The practical approach is to load only the amount of that one purchase.
Is a virtual card a good choice for a monthly subscription?
This is its weakest case. Next month's automatic renewal fails if the balance is not enough and the service cuts off mid use, and a dormancy fee lands on exactly the balance you were keeping for that renewal. If you must use a card, top it up by hand ahead of the date and do not count on the automatic part.
Finished this lesson?
Mark it done to track your progress across all 16 tracks on this device.